• Automatic loading robotic arm for molding press machine-MD8-65-F-V

      Product Features:

    • ★ This equipment is suitable for seamless integration with non-spherical molding press machines from brands such as JinDing Optics (our company), DTK, SYS, etc. The automatic loading robotic arm can be customized according to the specific needs of customers.

      ★ This equipment can meet the automation production requirements of one mold with one cavity, one mold with two cavities, one mold with three cavities, one mold with four cavities, and one mold with six cavities.

      ★ The automatic loading robotic arm is equipped with a vision system for real-time automatic detection of the upper and lower mold surfaces (appearance) and the lens surface (appearance).


    Specification Parameters:

    NO

    Project distinction

    Content

    Detailed specifications

    1

    Basic parameters

    power source

    Power supply: single-phase 220V; rated power: 2KW

    Compressed air: 0.55MPa±5%; 50L/min

    Mold specification

    Diameter: φ15~φ65mm; Height: 20 ~60mm; Square mold: 50×50mm

    Scope of application: one mold and one hole (claw type, optional top pen device)

    Two holes in one mold, three holes in one mold, four holes in one mold, six holes in one mold (vacuum adsorption type) Note: It is a multi-hole suction method

    Dimensions

    1600(L)×1300(W)×2100(H) ; Approx. weight: 820kg

    3

    drive mode

    High precision electric cylinder cylinder

    High-precision electric cylinder and SMC cylinder

    4

    Processing cycle

    around 60s

    Depending on the processing model

    5

    Tray capacity

    finished tray

    One layer, can hold 15 small rings 140×90

    preform tray

    One round layer, diameter 475mm can hold four 150×130

    Defective product tray

    140mm×90mm

    6

    Air purification

    FFU fan unit

    Realize the air repurification of the small environment of the equipment

    7

    visual system

    vision

    Monitor the cosmetic condition of molds and lenses

    8

    Mold, lens and preform transfer

    transfer

    Transfer of molds, lenses and preforms using pneumatic cylinders, pneumatic fingers, electric cylinders, error correctors and through-beam photoelectric sensors

    9

    Environmental
    requirements

    humidity

    30-60% , but no condensation

    temperature

    Normal temperature 20-28°C, but no condensation