• Automatic loading robotic arm for molding press machine-MD13-90-F-V

      Product Features:
    • ★ The automatic loading robotic arm of this equipment can be customized according to the specific needs of the customer.

      ★ This equipment can meet the automation production requirements of one mold with one cavity or one mold with multiple cavities.

      ★ The automatic loading robotic arm is equipped with a vision system for real-time automatic detection of the upper and lower mold surfaces (appearance) and the lens surface (appearance).

    Specification Parameters:

    NO

    Project distinction

    Content

    Detailed specifications

    1

    Basic parameters

    power source

    Power supply: single-phase 220V; rated power: 2KW;

    Compressed air: 0.55MPa±5%, 55 liters/min;

    Mold specification

    Diameter φ 16 ~ φ 90mm ; Square: 85mm×85mm

    The allowable height range of the total height of the upper and lower mold cores (including the preform): 22mm~68mm Scope of application: one cavity for one mold, multiple cavities for one mold

    Dimensions

    2100(L)×1300(W)×2150(H) ; Approx. weight: 1350kg

    3

    drive mode

    High precision electric
    cylinder cylinder

    High-precision electric cylinder and SMC cylinder

    4

    Processing cycle

    around 60s

    Depending on the processing model

    5

    Tray capacity

    Finished tray size

    One layer; it depends on the processing model

    Dimensions of the preform tray

    One round layer; it depends on the processing model

    Specification and size of defective product tray

    It depends on the processing machine

    6

    Air purification

    FFU fan unit

    Realize the air repurification of the small environment of the equipment

    7

    visual system

    vision

    Monitor the cosmetic condition of molds and lenses

    8

    Mold, lens and preform transfer

    transfer

    Transfer of molds, lenses and preforms using pneumatic cylinders, pneumatic fingers, electric cylinders, error correctors and through-beam photoelectric sensors

    9

    Environmental requirements

    humidity

    30-60% , but no condensation

    temperature

    Normal temperature 20-28°C, but no condensation