• Non-spherical precision molding press-MD8-65

      Product Features:

    • ★ This equipment is suitable for hot-press molding of non-spherical lenses (such as those used in automotive, surveillance, digital, sports, infrared sulfur, fiber optic ferrule, AR, etc.) made of glass, infrared materials, fiber optic ferrule materials, and other materials.

      ★ This equipment can meet the production needs of one mold with one cavity or one mold with multiple cavities.

      ★ The equipment's operating interface is equipped with a touch screen and has proprietary software with reserved customization and upgrade options. It features temperature abnormality alarm, cooling water, nitrogen, and compressed air abnormality alarm, as well as molding NG alarm. All alarm information is indicated by sound and light alarms, and recorded and stored. Electricity consumption, cooling water, and nitrogen are equipped with flow monitoring systems and devices.

      ★ Note: The sealed non-spherical precision molding press has unique production and processing techniques, consuming 20% less electricity and saving over 30% in nitrogen consumption compared to similar equipment.


    Specification Parameters:

    NO

    Differentiation of projects

    Material

    Detailed specifications

    1

    Basic parameters

    Power source (Standard type)

    Power supply: Three-phase 200VAC/32KVA, three-phase 380VAC/32KVA (optional)

    Startup power: 32KW

    Operating power: 8~13KW

    Compressed air: 0.55MPa ±5%, 50 liters/min

    Cooling water: 0.3MPa, 8~14 liters/min, 20±1°C

    Nitrogen gas: 0.3MPa ±5% (purity 99.999%), 30~40 liters/min, oxygen content ≤2ppm

     

     

        Power source (Sealed type)

    Power supply: Three-phase 200VAC/32KVA, three-phase 380VAC/32KVA (optional)

    Startup power: 32KW

    Operating power: 7~10KW

    Compressed air: 0.55MPa ±5%, 50 liters/min

    Cooling water: 0.3MPa, 8~14 liters/min, 20±1°C

    Nitrogen gas: 0.3MPa ±5% (purity 99.999%), 16~20 liters/min, oxygen content ≤2ppm

    Mold specifications

    Diameter: φ15~φ65mm；Height: 20~60mm；Square mold: 50×50mm


         Maximum operating
    temperature

    Temperature: 700°C, 750°C (optional) Ramp-up time: Less than 15 minutes

    Overall dimensions

    Dimensions: 1923(L)×1560(W)×2000(H) Weight: Approximately 1000kg

    2

    Transfer of
    molds

    Transfer

    The transfer of molds is performed using a combination of pneumatic cylinders and high-precision electric cylinders.

    3

    Environmental
    requirements

    Cleanliness

    Below Class 10,000 (recommended below Class 1,000, or placing Class 100 FFU on the operating platform to ensure local cleanliness).

    Environmental humidity

    30-60%, but without condensation.

    Environmental temperature

    22℃±3℃, but without condensation.

    4

    Specifications
    of the heat
    distribution plate

    Size of the top heat
    distribution plate

    100mm(L)×70 mm(W)×10 mm(H)

    Size of the bottom heat
    distribution plate

    100mm(L)×78 mm(W)×10 mm(H)

    Material of the heat
    distribution plate

    Alloy plate, ceramic plate (optional).